The tooling system comprises of 6 turning, 4 boring and 6 live milling tools giving a capacity of 16 tools. lts unique design allows for rapid chip to chip times, which will generally out perform turret type machines, enabling a reduction in cycle times.
lts rigid design allows heavy duty cutting to be performed, and the 6 live tooling spindles with both C-axis and Y-axis, can complete the most complex of work pieces in one operation.
i-42 ECO
This 4 axis gang tooling lathe is an affordable
alternative to a turret type,C-axis lathe.
The tooling system comprises of 6 turning, 4 boring and 6 live milling tools giving a capacity of 16 tools. lts unique design allows for rapid chip to chip times, which will generally out perform turret type machines, enabling a reduction in cycle times.
lts rigid design allows heavy duty cutting to be performed, and the 6 live tooling spindles with both C-axis and Y-axis, can complete the most complex of work pieces in one operation.
TOOLING SYSTEM
The tooling block consists of 6 turning tools, 4 boring tools ang 6 live tools (16 in total).
This gang tooling system allows fast chip to chip times as there is very little movement from one tool to the next.
In addlition, the Y axis allows complex and ‘off-center’ milling operations to be performed, and with full C-axis control,many complex contours can be machined.
Axial view
i-42 Eco
SPINDLE
The cartridge type spindle runs on P4 high precision bearings giving high radial and axial stability, allowing for heavy duty cutting.
The spindle is assembled and tested in a temperature controlled clean room, sealed, and requires no maintenance. The spindle housing is large, and symmetrically ribbed to allow heat dissipation and thermal stability.
LINEAR GUIDEWAYS
The machine is equipped with high precision, HIWIN linear guideways.
The use of 35mm rails throughout the machine increases stability and accuracy, and allows heavier cuts to be achieved.
Specification
Mitsubishi Controller M70 |
Spindle Capacity |
Max. Bar Working Dia |
42.0mm/60.0mm (option) |
Mitsubishi Motor |
Main-spindle |
AC Spindle 7.5kw/11.0kw(option) |
Spindle Max. Turning Length |
150.0 mm |
X/Z axis spindle |
AC Servo 1.0kw |
Spindle Collet Chuck Type |
KK5-173E42B/KK6-185E60B(option) |
Spindle Nose |
ISO(DIN) A2-5/ A2-6 |
Spindle Bore |
44.0/62.0mm(option) |
Motorized Tool |
AC Servo 1.0kw/1.5kw (option) |
Spindle Speed Range |
3000 rpm/4000 rpm(4000 rpm/6000 rpm option) |
Hydraulic System |
Hydraulic Motor |
0.75 kw |
C Axis |
Positioning Accuracy |
0.001° |
Max. Pressure |
50 kg/cm2 |
Travel & Feed |
X/Y/Zaxis Travel |
150.0/415.0/230.0mm |
Tank Capacity |
50L |
Lubrication |
Lubricant Motor |
25W |
A.T.C System |
OD Tools Main Spindle |
6 |
Max. Pressure |
15kg/cm2 |
ID Tools Main Spindle |
4 |
Tank Capacity |
2 Liter |
Tool Shank Size |
20.0mm |
Boring Bar (main) |
ER-20/20.0mm |
Motorized Tool |
Index Time |
0.3sec(one)/0.6(full) |
Number of motorized tools |
6 Tools (3 Axial,3 Radial) |
Coolant System |
Coolant Motor Type |
2HP coolant ; 4T5-5 hight pressure coolant |
Speed |
4000rpm(Max.) |
Coolant Tank Capacity |
160L |
Size |
ER-20 |
Machine Size |
Length/Width/Height |
2000/1500/1900mm |
Max.Drilling Dia. |
12.0 mm |
Weight |
2750kg |
Max. Tapping capacity |
M10 X P1.25 |
Products Download